A: Perpa Tic. Mrk. A Blok Kat: 4-5 No:135/137 34384 Okmeydanı, Şişli / İSTANBUL - TURKEY     P: +90212 210 39 55    M: satis@emekkablo.com

Seslendirme Kabloları

AUDIO CABLES

APPLICATION

The conductor size of this type cable changes between 0.5mm2² and 4.00 mm2². They show high performance in audio band.

BROCHURE

APPLICATION

This type of high performance cable are designed for use on studio monitor and hi-fi systems. This type of high performance cable are designed for use on studio monitor and hi-fi systems. The outer sheath is made from PVC and core conductor material is finely stranded oxygen free copper. This provides high flexibility and accurate linearity in audio spectrum.

BROCHURE

APPLICATION

Twinaxial cable designed with conductive area of o,75 mm2 is suitable for use when transferring only the low level power. This cable has soft PVC outer sheath might be used successfully in tweeter connections. Speaker cables which have 1,50 mm2 diameter are used in middle range power transmissions. It’s conductor which are made of bunched copper and it’s flexible cover make it more successful,depending on the application. Higher cross-section cables in the product of the low resistance conductor makes an excellent choice. For instance, bass entires..

BROCHURE

APPLICATION

Speaker cables which have 1,50 mm2 diameter are used in middle range power transmissions. It’s conductor which are made of bunched copper and it’s flexible cover make it more successful,depending on the application. Higher cross-section cables in the product of the low resistance conductor makes an excellent choice. For instance, bass entires..

BROCHURE

APPLICATION

One of the most essential requirements of all audio systems are patch cables and adapters, presenting a wide variety of connectors. In case of realising the self-characteristical necessity of the system, it would be advisable to keep a group of adapters in reserve, in order to remove arising problems instantly. As result of their small construction and lightness, these cables would be hold in estimation especially in studio atmospheres, just the same reason give the individual sheathed conductors, which turn away external electrical source effects. The individual sheathed cables are produced in various profiles according to their application.

BROCHURE

APPLICATION

These instrument cables are ideal for stage uses, where mechanical resistance plays a considerable part. For that purpose, this sort of cables would be produced under specific controls in respect of their resistance and stability. The EK.106 instrument and EK.107SC guitar cables, designed In favour of professional purposes, keep away external signals from the conductors by using double screening; a conductive plastic layer underneath the copper spiral wound shield provides total protection against interference. The space between the two conductors remain unchanged, because of the special plastic layer insulation, which avoid even under the heaviest load contusions and flexures, and causes therefore a regular electrical performance. The impressive insulation of the conductor creates minimum capacitance, clear sounds and minimum loss. The unbalanced EK.106 (Ø6.0mm) and EK.107SC (Ø7.0mm) cables, is manufactured with a special supplemented PVC cover, in order to provide more flexibility and stability.

BROCHURE

APPLICATION

This balanced microphone cables is manufactured by using high quality components and following strict quality control rules. With its construction it leads to the desired efficient communication characteristics of professional audio systems, even under hard circumstances or careless use. The EK.206A microphone cable offers excellent flexibility even with a diameter of 6.0 mm.Ø by using a special prepared mixture for the PVC cover. With a total conductive area of 0.22 mm2. per conductor, this microphone cable is well suited for long runs. To make sure that the cable remains noise-free even under rough handling, the inside of the microphone cable is padded with cotton threads to retain its round profile. Effective screening is ensured by the cable’s closely woven shield of high purity copper.

BROCHURE

APPLICATION

Emek Kablo presents a large product range of 110Ω digital AES/EBU and DMX cables.

BROCHURE

APPLICATION

This cable is especially designed for general purpose studio applications. The multichannel microphone cable is prepared for studio installation provisions. Each individually insulated channel consists of twisted conductors under a common jacket. Each twisted conductor is composed of a drain wire surrounded by an aluminium foil and covered individually by a PVC jacket. Surpassingly flexible capacity makes this cables perfect for control room and sound unit layouts and give rise to distribute all sound signals over one cable.

CONSTRUCTION

Conductor : 7x0,20mm Stranded tinned copper wires (0.22mm2)
Insulation : PO - Poliolefin 
Pair Shielding : 0,22mm2²Tinned copper drain wire+Aluminium/Polyester foil
Pair Jacket : PVC - Gray (Numbered) 
Assembly : Cores twisted in layers
Overall Shield : 0,22mm2² Tinned copper drain wire+Aluminium/Polyester foil
Outer Jacket : PVC - Mat black

BROCHURE

APPLICATION

These cables are very flexible and suitable when transferring all analog audio transmission as fixed, mobile broadcast vehicles..Core color and number coding are ideal to easy connection.

CONSTRUCTION

Conductor : 7x0,20mm Cu (0.22mm2) 
Insulation : PO - Poliolefin 
Pair Shielding : 0,22mm² Tinned copper drain wire+Cu Spiral
Pair Jacket : PVC - with colur code(Numbered)
Assembly : Cores twisted in layers
Outer Jacket : PVC - Mat black

BROCHURE

APPLICATION

These cables are designed to fixed tiles .It is suitable when transmissing of DMX signal and digital AES/EBU.

CONSTRUCTION

Conductor : 7x0,20mm Cu (0.22mm2) 
Insulation : PO - Poliolefin 
Pair Shielding : 0,22mm² Tinned copper drain wire + Cu braid
Pair Jacket : LSZH - Dark blue (Numbered)
Assembly Cores twisted in layers
Overall Shield : 0,22mm² Tinned copper drain wire + Cu braid
Outer Jacket : LSZH - Mat black 

BROCHURE

APPLICATION

These cables are designed to fixed tiles .It is suitable when transmissing of DMX signal and digital AES/EBU.

CONSTRUCTION

Conductor : 7x0,20mm Cu (0.22mm2) 
Insulation : Foam-skin polyethylene  
Pair Shielding : 0,22mm² Tinned copper drain wire + Cu Spiral shield
Pair Jacket : PVC - Blue (Numbered)
Assembly Cores twisted in layers
Outer Jacket : PVC - Blue

 

BROCHURE